Commit graph

823 commits

Author SHA1 Message Date
noname
1ae2745fd1 Add missing function prototypes. 2014-04-28 18:38:06 +02:00
noname
a48f2be7f5 Use MODBIT in xseturgency. 2014-04-28 18:38:06 +02:00
noname
17fa1493ee Compute ena_sel as one expression. 2014-04-28 18:38:06 +02:00
Roberto E. Vargas Caballero
a8a9e66a7d Simplify expressions in tputc() 2014-04-28 18:38:05 +02:00
Roberto E. Vargas Caballero
17290f493b Fix misplaced break
This misplaced break was causing an incorrect fall through
from DSR to DECSTBM.
2014-04-28 18:38:05 +02:00
Roberto E. Vargas Caballero
43d74ef362 Create a function for DEC test
Almost of the sequences execute their action in a separate function,
which is good because helps to read the full set of sequences
faster.
2014-04-28 18:38:05 +02:00
Roberto E. Vargas Caballero
3764f38fc8 Fix tputc control code handling
The patch 53105cf modified how control codes were detected, because
it tried to handle also C1 control codes (0x80-0x9f), that have
upper bit to 1, so they are multi byte character in utf8.
Code was checking the value of width in order to known that after
decoding the unicode point had a width of 1 byte, but it as incorrect
because this width is the columnb width.
2014-04-28 18:32:09 +02:00
Roberto E. Vargas Caballero
53105cf74f Remove repeated initialisation of term.esc
Once a sequence is completed term.esc must return to 0, so
instead of repeating this expression in all the cases is
better put it at the end of the block.
2014-04-27 11:30:21 +02:00
Roberto E. Vargas Caballero
aa35bbd7a1 Cancel DCS with SUB, CAN, ESC or any CC1 code
From http://www.vt100.net/docs/vt510-rm/chapter4:

	*The VT510 ignores all following characters until it receives a
	 SUB, ST, or any other C1 control character.

So OSC, PM and APC sequence ends with a SUB (it cancels the sequence
and show a question mark as error), ST or any another C1 (8 bits)
code, or their C0 (7 bits) equivalent sequences (at this moment we
do not handle C1 codes, but we should). But it is also said that:

	Cancel  CAN
	1/8     Immediately cancels an escape sequence, control sequence,
		or device control string in progress. In this case, the
		VT510 does not display any error character.

	Escape  ESC
	1/11    Introduces an escape sequence. ESC also cancels any escape
		sequence, control sequence, or device control string in
		progress.
2014-04-27 11:30:13 +02:00
Markus Teich
704d12442e add break;s for last cases in switch statements 2014-04-27 10:34:57 +02:00
noname
02d2df5790 Do not eat ESC character if control string is not properly terminated.
Currently tputc handles the case of too long control string waiting for
the end of control string.

Another case is when there is ESC character is encountered but is not
followed by '\\'.  In this case st stops processing control string,
but ESC character is ignored.

After this patch st processes ESC characters in control strings properly.

Test case:
printf '\e]0;abc\e[1mBOLD\e[0m'

Also ^[\ is actually processed in the code that handles ST.
According to ECMA-048 ST stands for STRING TERMINATOR and is used to
close control strings.
2014-04-26 00:14:42 +02:00
noname
c4b79b055d Fix for multibyte characters in techo.
Works for both signed and unsigned char.
2014-04-26 00:03:09 +02:00
noname
7f1e02e4db s/DSC/DCS/ DCS stands for DEVICE CONTROL STRING 2014-04-26 00:03:09 +02:00
noname
84f6dbffa5 Use xwrite instead of write. 2014-04-26 00:03:08 +02:00
noname
2d67f99d28 Remove unnecessary break 2014-04-26 00:03:08 +02:00
noname
4a8574b439 Comment fix. 2014-04-25 23:57:44 +02:00
Colona
8f11e1cd03 On terminal resize, clear the alt screen with its own cursor.
Currently the alternate screen get messed up on resize if it has
different colors or mode.
2014-04-25 23:57:44 +02:00
noname
844c503c80 Optimize tputtab.
Before this patch executing
	printf '\e[10000000000I'
or
	printf '\e[10000000000Z'
resulted in long delay.
2014-04-25 23:57:44 +02:00
noname
1b0b9759dc Use != instead of ^ for logical values.
sel.alt is only changed by
	sel.alt = IS_SET(MODE_ALTSCREEN);
2014-04-25 23:57:43 +02:00
noname
99d2d6007a Use BETWEEN macro in xsetcolorname and fix style. 2014-04-25 23:57:43 +02:00
Christoph Lohmann
fe31a3f634 Conformity in the -g geometry handling.
Thanks to Yuri Karaban for suggesting this!

These changes make -g correspond to <cols>x<rows> and honor it so non-tiling
window managers can work with the size hints afterwards. It also adds a -i
flag to force the window size. This is needed so -g keeps being useful in dwm.
2014-04-25 22:34:24 +02:00
Roberto E. Vargas Caballero
6b7f63bac5 Simplify a bit more tdeletechar and tinsertblank
The large and repeated expression used in memmove to indirect
the line can be simplified using a pointer, that makes more
clear where begins and where ends the movement.
2014-04-25 17:25:59 +02:00
noname
80b32af794 Simplify tdeletechar and tinsertblank and fix memory corruption.
Current CSI parsing code uses strtol to parse arguments and allows them
to be negative. Negative argument is not properly handled in tdeletechar
and tinsertblank and results in memory corruption in memmove.

Reproduce with printf '\e[-500@'

Patch also removes special handling for corner case and simplifies
the code.

Removed
	term.dirty[term.c.y] = 1
because tclearregion sets dirty flag.
2014-04-25 17:17:48 +02:00
noname
16ac85bf54 Style fixes in tscrollup. 2014-04-23 20:38:04 +02:00
noname
fe527aa508 Do not set dirty flag twice in tscrollup and tscrolldown. 2014-04-23 20:37:59 +02:00
noname
3afdb4ff04 Use tsetdirt in tscrollup and tscrolldown.
tscrollup and tscrolldown do not use tsetdirt, but their code is
equivalent to

        tsetdirt(orig, term.bot-n);
        tsetdirt(orig+n, term.bot);

tclearregion also marks cleared lines as dirty.
In tscrolldown it sets lines from term.bot-n+1 to term.bot dirty, and in
tscrollup it sets lines from orig to orig+n-1 dirty.

In both functions all lines from orig to term.bot are effectively set
dirty, but in tscrolldown lines from orig+n to term.bot are set dirty
twice, and in tscrollup lines from orig to term.bot-n are set dirty
twice.

These patches make it clear which lines are set dirty and sets them
dirty once in each funciton.
2014-04-23 20:35:16 +02:00
noname
f9dc374ea0 Fix techo handling of control and multibyte characters.
techo compares signed char to '\x20'. Any character with code less then
'\x20' is treated as control character.  This way characters with MSB
set to 1 are considered control characters too.

Also this patch makes techo display DEL character as ^?.

To reprocuce the bug, enable echo mode using printf '\e[12l',
then type DEL character or any non-ASCII character.
2014-04-23 20:31:45 +02:00
noname
fa19f241a3 Make xrealloc and xstrdup style consistent. 2014-04-23 15:39:04 +02:00
noname
df1810dd8f Use BETWEEN in tsetchar. 2014-04-23 15:39:03 +02:00
noname
ed855ea432 Use uint and uchar instead of unsigned int and unsigned char. 2014-04-23 15:39:03 +02:00
noname
68d97457ec Remove argument names from function prototypes. 2014-04-23 15:39:03 +02:00
noname
49672dac7b Style fix in tdumpsel. 2014-04-23 15:39:02 +02:00
noname
f21e47f44a Use BETWEEN in tinsertblankline and tdeleteline. 2014-04-23 15:39:02 +02:00
Christoph Lohmann
87abc7cd59 It's 2014 now. 2014-04-22 19:22:58 +02:00
noname@inventati.org
1388870331 move MODBIT to Macros section
Patch moves MODBIT to macros section and uses it in tselcs.
2014-04-20 21:13:37 +02:00
noname@inventati.org
6b56cbf9cc misplaced parenthesis in LEN macro 2014-04-20 21:07:04 +02:00
Markus Teich
3269bf213d remove confusing SERRNO macro
I found the SERRNO Macro slightly confusing, since you have to look
it up, if you don't know it already. A web search showed it does
not seem to be any kind of standard. Also there was no reason in
the commit log when it was introduced in 2009. As you can see it
also leads to new patches, which don't use this macro (probably the
author did not know about it).
2014-04-20 21:00:46 +02:00
noname@inventati.org
4ad2fc7f18 Simplify techo
Remove special case for \e because it is handled well by "control code"
case.
2014-04-15 08:16:39 +02:00
noname@inventati.org
dc74c4f729 typedefs instead of #defines
Replaced #defines with typedefs where possible, patch attached.
2014-04-15 08:14:46 +02:00
q@c9x.me
b8d6171cb0 fix cursor handling when alt screen is disabled
I don't like this alt screen thing, but when
allowaltscreen == 0, the cursor is still saved
and restored after calling 'less' (or 'man').

This patch makes allowaltscreen == 0 usable.
2014-04-15 08:13:41 +02:00
Roberto E. Vargas Caballero
ebb6e03201 Merge remote-tracking branch 'origin/master' into omaster 2014-04-15 08:11:47 +02:00
Christoph Lohmann
f27b44b7c2 Removing two unnecessary gettimeofday(). 2014-04-11 18:11:25 +02:00
Toaster Toaster
3cb80840db Increment XSync consistency
This patch cleans up a style inconsistency.
2014-04-11 16:29:13 +02:00
Christoph Lohmann
a495fce128 There is no need for a full dirt redraw. 2014-04-05 20:34:57 +02:00
Christoph Lohmann
6f4cfa5136 Fixing a compiler warning with the assignment. 2014-04-02 09:26:28 +02:00
Rafa Garcia Gallego
672e4e4b03 Fix segfault when pressing PrintScr without a selection 2014-03-27 07:48:32 +01:00
Damian Okrasa
45b808b88e new utf decoder
This patch replaces current utf decoder with a new one, which is ~50
lines shorter and should be easier to understand. Parsing 5 and 6
sequences, if necessary, requires trivial modification of UTF_SIZ
constant and utfbyte, utfmask, utfmin, utfmax arrays.
2014-03-27 07:19:37 +01:00
Roberto E. Vargas Caballero
71328cbcdc Merge branch 'master' of ssh://suckless.org/gitrepos/st 2014-03-10 15:16:26 +01:00
Roberto E. Vargas Caballero
78f8843bc7 Add sequence for printing the current selection
This is very usefull in order to can select what is sent
to the plumber.
2014-03-06 07:55:07 +01:00
Roberto E. Vargas Caballero
96c230e476 Add key definition for printer sequences
These new combinations generate the same behaviour (basically) of
vt102. It is a good way of communicating st with other programs.

[0] http://www.vt100.net/docs/vt102-ug/chapter2.html
2014-03-06 07:53:15 +01:00
Roberto E. Vargas Caballero
6166a1afc8 Add MC for the full screen
This sequence is very useful because allows comunicate the content
of the terminal to another program.
2014-03-06 07:51:58 +01:00
Roberto E. Vargas Caballero
cf332a325d Add MC for a single line
This sequence print the current line. It is different to the
'printer on' sequence, where all the characters that arrive to the
terminal are printer. Here only the ascii characters are printed.
2014-03-06 07:50:34 +01:00
Christoph Lohmann
1584956a60 Style cleanup.
Add some note about the main reason why st is still that big.
2014-03-01 11:04:03 +01:00
Christoph Lohmann
d2ec39f0ef Style matters. 2014-03-01 09:22:57 +01:00
Roberto E. Vargas Caballero
1f0d981bd7 Add MC sequence
This sequence control when the printer is enabled or disabled. This
sequence control the behaviour of the -o option.
2014-02-22 11:54:30 +01:00
Roberto E. Vargas Caballero
cdb3b1892a Add xstrdup function
Since we are using xmalloc, xrealloc ..., then it is not logical
call directly to strdup.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-02-08 19:58:37 +01:00
Roberto E. Vargas Caballero
315b7ee9ce Merge remote-tracking branch 'origin/master' 2014-02-04 11:46:45 +01:00
Christoph Lohmann
c2026a4950 Removing the w3img support.
The patch to add w3img support destroys our way to handle fps and so stop
wasting resources on fast scrolling. Due to w3img being a hack to display
images in an ugly way, is there no need to support this. Use some real way to
display images.
2014-02-03 20:54:25 +01:00
Roberto E. Vargas Caballero
6521b5dc32 Remove non defined behaviour in selcopy
It is not defined when lateral effects of expressions are
calculated, so an expression as:

	--last >= gp && !(selected(last - gp, y)

is non portable.
2014-02-02 19:42:01 +01:00
Roberto E. Vargas Caballero
a8d5870073 Remove duplicated code in strhandle
The error condition was duplicated in two different switches.
This new version centralized the error handling in only one place.
2014-02-02 19:42:01 +01:00
Eric Pruitt
9559100130 Use character scaling in XCopyArea 2014-01-21 19:20:17 +01:00
Amadeusz Sławiński
c0a56ef4be Make w3mimgdisplay work with st
Before this patch draw() calls drawregion which calls xdraws and then
updates whole window in one call thus overdrawing anything drawn by
w3mimgdisplay. After moving XCopyArea to xdraws it only updates the
regions which are being updated by XftDraw* functions. It may do a few
more calls to XCopyArea with this patch.

Signed-off-by: Amadeusz Sławiński <amade@asmblr.net>
2014-01-16 10:20:20 +01:00
Amadeusz Sławiński
9df9a4723d Fix truecolor escapes, when both bg and fg are set
for example
echo -e "\e[48;2;255;0;0m\e[38;2;0;0;255m test "
should render on red bg with blue fg

also now elinks works correctly when using 'truecolor' option
in preferences

Signed-off-by: Amadeusz Sławiński <amade@asmblr.net>
2014-01-03 15:28:16 +01:00
Eon S. Jeon
e8dba89164 query pixel size from matched font
Sorry for another duplicated mail. I found the patch is malformed
significantly. I've been away from my laptop for a while, so I'm quite
unfamiliar with the settings on this system...
2014-01-03 15:26:25 +01:00
Eon S. Jeon
d60ee7337b Prevent resizing stdin
This fixes a bug that the parent tty gets resized whenever you launch
st through command line.

The problem was that ioctl was resizing cmdfd before it gets
initialized in ttynew. Since cmdfd is a global variable, its initial
value is 0, and consequently stdin was being resized.
2013-12-18 08:11:22 +01:00
Eric Pruitt
39f28b18b7 Set _NET_WM_PID attribute 2013-12-11 21:33:52 +01:00
René Rietz
08a3eea571 Add stdint include
Since st is using now int32_t and uint32_t the inclusion of
stdint or inttype is mandatory, because in other case the
definition of these new types will not be known by the
compiler.
2013-11-25 16:08:01 +01:00
Roberto E. Vargas Caballero
53474391bc Fix stupid bug in tdefcolor returning -1 in unsigned function
k0ga misktook applying patch of others. Sorry guys!!!!
2013-11-25 14:09:53 +01:00
Johannes Hofmann
1fe0a5f39a Use int instead of long for color
This patch replaces long by int32_t. It saves
some memory on 64bit systems.
2013-11-24 10:43:35 +01:00
Carlos J. Torres
4435e0ee67 add _NET_WM_NAME 2013-11-23 10:54:57 +01:00
Mark Edgar
7263820759 Simplify logic in kmap(). 2013-10-28 19:28:52 +01:00
Mark Edgar
1fa27b93f9 Simplify logic in match(). 2013-10-28 19:28:35 +01:00
Roberto E. Vargas Caballero
3d3c37bc70 Merge remote-tracking branch 'origin/master' into omaster 2013-10-28 19:18:24 +01:00
Rob Pilling
489982d4b8 Fixed lock up when system time jumps backwards
Signed-off-by: Christoph Lohmann <20h@r-36.net>
2013-10-27 13:17:11 +01:00
Mark Edgar
297c886b72 Ignore numlock (Mod2Mask) for button events too.
Conflicts:
	config.def.h
	st.c
2013-10-20 09:53:34 +02:00
Mark Edgar
0f6942cdf6 Avoid buffer overrun in bpress()
Use correct type for Mousekey.b (XButtonEvent.button).
2013-10-15 17:46:17 +02:00
Mark Edgar
8e577322a3 New ttysend() function calls ttywrite() and techo(). Honor MODE_ECHO when pasting in selnotify(). 2013-10-07 21:05:21 +02:00
Mark Edgar
939e149544 Avoid buffer overrun in kpress() and remove limit on shortcut strings. 2013-10-07 21:03:51 +02:00
Mark Edgar
02ae3ce6fd Simplify Mod1 logic in kpress(), eliminating locals and a memcpy. 2013-10-07 20:56:51 +02:00
Roberto E. Vargas Caballero
7a4eefe87c Add support for multiple charset definitions
vt100 has support for two defined charset, G0 and G1. Each charset
can be defined, but in each moment is selected only one of both
charset. This is usually used selecting a national charset in G0
and graphic charset in G1, so you can switch between graphic
charset and text charset without losing the national charset
already defined.

st hasn't support for national charsets, because it is an utf8
based terminal emulator, but it has support for graphic
charset because it is heavily used, but it only supports G0,
without understanding G1 selection sequences, which causes some
programs in some moments can print some garbage in the screen.

This patch adds a fake support for multiple charset definitions,
where we only support graphic charset and us-ascii charset, but
we allow more of one charset definition.

This patch allow define G0 until G3 charsets, but only accepts
select G0 or G1, and it accepts some national charset definitions
but all of them are mapped to us-ascii.
2013-10-02 21:22:15 +02:00
Christoph Lohmann
c5c2365ab7 People, learn to keep to styles. Thanks. 2013-10-02 21:06:50 +02:00
Mihail Zenkov
62ab938965 Fix save/restore cursor
st was assuming that save/restore cursor position was independent
of the screen that was shown in each moment, but it is not true,
because each screen has a different save/restore buffer. This
patch fixes it.
2013-10-02 20:47:19 +02:00
Mihail Zenkov
2b1bc8087f Add DSR cursor position sequence 2013-10-02 20:45:19 +02:00
Maurice Quennet
eeae9b0cee Fix core in multi-line selection on OpenBSD
OpenBSD 5.3 amd64 release version with the most current st
version from git, crash and dump core when selecting multiple
lines whith the cursor.  This happens, because on line 964
of st.c (gp-1)->mode is accessed, although gp is still
pointing at the beginning of the array term.line[y] (see
line 939 for initialization of gp).
2013-09-23 19:26:24 +02:00
Egmont Koblinger
8ac0a5f872 Add bracketed paste mode
This patch enables bracketed paste mode (
http://invisible-island.net/xterm/ctlseqs/ctlseqs.html#Bracketed%20Paste%20Mode
).

It's mainly useful for text editors to disable line wrapping and auto
indentation when text is being pasted, rather than typed from keyboard.

On the emulator side, it is supported by at least xterm, urxvt,
gnome-terminal, putty, iterm2; and I have a patch for konsole.

On the application side, vim can be configured easily to handle this, and
I have pending patches for mcedit and joe. Probably many others also
support it.
2013-09-23 09:27:55 +02:00
Michael Forney
eae31a532e Fix some bugs in mouse tracking logic
* Button number in X10 mode:

  I believe the button - 1 came from "C b is button - 1" from [0].
  However, above this section, it states

    "Normally, parameters (such as pointer poisition and button number)
     for all mouse tracking escape sequences generated by xterm encode
     numeric parameters in a single character as value+32. For example, !
     specifies the value 1."

  Also, from the description of SGR,

    "The encoded button value in this case does not add 32 since that
     was useful only in the X10 scheme for ensuring that the byte
     containing the button value is a printable code."

  This suggests that we should still add 32 to the button value when in
  MODE_MOUSEX10.

* No button release reporting in X10 mode:

    "X10 compatibility mode sends an escape sequence only on button press,
     encoding the location and the mouse button pressed."

* Fix MODE_MOUSEMOTION:

  Currently, motion reporting is skipped when oldbutton == 3
  (corresponding to no button being pressed). However, oldbutton is
  only set on a button press, which will never be 3.

[0]: http://invisible-island.net/xterm/ctlseqs/ctlseqs.html
2013-09-13 19:49:25 +02:00
Roberto E. Vargas Caballero
bef599bb27 Add audible bell
\a is the character for bell, and st is only marking the window as urgent
if it is not active. This patch adds an audible bell which can be disable
with bellvolume variable.

Signed-off-by: Christoph Lohmann <20h@r-36.net>
2013-09-12 20:47:41 +02:00
Christoph Lohmann
210dda9570 Wide character support.
Thanks "Eon S. Jeon" <esjeon@hyunmu.am>!
2013-09-07 12:41:36 +02:00
Mark Edgar
4245ba0d12 Correctly initialize altscreen when defaultbg is not 0.
The alternate screen is not properly initialized when st starts. To see
this, set defaultbg in config.h to anything other than 0 (for example, swap
defaultfg and defaultbg), and run:

./st -e sh -c 'tput smcup; read'

You should see that the top-left 80x24 rectangle is black (or whatever
colorname[0] is), while the rest of the screen (if any) has the desired
colorname[defaultbg] color.

The attached patch fixes this by initializing term.c.attr in tnew() before
calling tresize(). It also removes the unnecessary xcalloc() calls, which
misled me on this bug hunt since it is really tclearregion() which
initializes term.lines and term.alt in tresize().
2013-09-04 18:33:02 +02:00
Eon S. Jeon
f3d438b101 Regarding commit 7e3cff3
Hello.

I reviewed and tested commit 7e3cff3, and made a patch that fixes some
problems in it.

1. There's a semicolon after an if statement, which is obviously a
typo.

2. The current way of calculating text position in "xdraws" yields
inconsistent results in some cases. This is due to the use of
"font->width", which varies. Instead, "xw.cw" has to be used as the
character width.

Sincerely,
Eon
2013-08-30 07:50:05 +02:00
Christoph Lohmann
8d21ced085 Correcting the bitmask value check. 2013-08-20 18:18:48 +02:00
Eon S. Jeon
347a45c352 Fix signess of tdefcolor
tdefcolor() returns -1 on error, while its return type is
unsigned long. At the same time, line 1724 and 1731 are checking the
positivity of its unsigned return value.
2013-08-06 08:32:11 +02:00
Alexander Sedov
22eeda56b7 Fixed memory leak in xsettitle(). 2013-08-05 11:45:53 +02:00
Michael Forney
86c03ddc82 Fix blink mode check
ATTR_BLINK is an attribute for a Glyph and will not be set in term.mode.
2013-08-05 11:45:52 +02:00
Eric Pruitt
7e3cff33ff Use character size scaling factors
The bounding boxes for characters can be scaled using "cwscale" and "chscale"
to scale the width and height respectively.
2013-08-05 11:44:18 +02:00
Roberto E. Vargas Caballero
aaee0e8b28 Reload colors in reset
Colors definition can be changed using a OSC sequence, so
we have to reload them if we want be sure all the colors
are the correct.

Could be desirable free the colors allocated due to rgb
colors and inverse colors (XftColorAllocValues in xdraws),
but it is impossible due we use the same structure for all
of them.
2013-07-20 23:25:46 +02:00
Roberto E. Vargas Caballero
8dde8cde41 Add RGB color definition
This patch uses the bit 24 in the color descriptor as an indicator
of RGB color, so we can take the values and generating the XftColour
directly in xdraws.
2013-07-20 23:25:38 +02:00
Eon S. Jeon
33ad83d492 Improved font caching
I made a patch that improves the performance of font caching mechanism.
This is based on a funny behaviour of FontConfig: it was handling
FcCharSet in a somewhat unexpected way.

So, we are currently adding "a character" to a new FcCharSet, and then
add it to a FcPattern. However, if we toss the FcPattern to FontConfig,
it loads the entire language(charset) that contains the character we
gave. That is, we don't always have to load a new font for each unknown
character. Instead, we can reused cached fonts, and this significantly
reduces the number of calls to extremely slow FontConfig matching
functions.

One more thing. I found that, in libXft, there's a function called
XftCharExists. XftCharIndex internally calls this function, and
does more stuffs if the character does exist. Since the returned index
is never used in st, we should call XftCharExists instead of
XftCharIndex. Please note that I already made this change in the patch.
2013-07-19 08:38:10 +02:00
Markus Teich
40e4d76d22 fix: whitespace 2013-07-04 09:58:14 +02:00
Alexander Sedov
fbc589d506 Remove long text being cropped/wrapped to standard 80x24 on launch.
To be more specific, now tty creation is delayed until X window is
actually mapped; last ConfigureNotify before mapping determines
initial tty size.
Please report problems if there are any.
2013-07-04 09:36:22 +02:00
Markus Teich
6fc471ccc6 fix: consistent usage of bitmask operations on unicode functions 2013-07-04 09:28:19 +02:00
Markus Teich
8b602a37a6 fix: do not need an extra variable for a single read 2013-07-04 09:26:18 +02:00
Roberto E. Vargas Caballero
6e1c7c8afc Fix match function bugs
There were two problems with match denfinition.

1) There was a forward declaration in the form:

	static inline bool match(uint, uint);

but later the function was defined as:

	inline bool
	match(uint mask, uint state) {

This causes that there were two different functions in the code, one local
and inline, and other inline but extern. All was working without problems
due to we were using -Os, and the compiler was using the extern definition
and it was no expanding the static declaration. If you removed the -Os flag,
then you got linker errors due it was no able to find the static definition
of the static declaration.

2) The mask checking was incorrect because we were doing the test:

	(state & mask) != state

and this test only was saying that at least all the enabled bits of state
were enabled also in mask, but no all the possible bits in mask. This was
the origin of the bug reported by Xavier Cartron, where he said it was
possible activated some shortcuts with some of the modifiers defined in the
config.h file.
2013-07-04 09:21:57 +02:00
Roberto E. Vargas Caballero
90c6f055b6 Remove unneded call to draw
draw is the function which update the Xwindow with the information st has,
and it is designed in a way that it must be called once in the main loop
(run function), and calling it in other places it is a waste of time.
2013-07-04 09:14:50 +02:00
Roberto E. Vargas Caballero
ebbac77d74 Fix selection clearing
The way st knows if there is a selection activated is checking if sel.ob.x
is equal to -1. In some parts of the code the way of disabling the selection
was only setting it to -1, but after it you can't be sure if the selection
is clearing from the terminal representation, because it is necessary mark
all the lines affected by the selection as dirty. Already there is a functon
which perform this task, selclear.
2013-07-04 09:14:50 +02:00
Christoph Lohmann
5d3318c0c7 Fixing title setting with the title argument. 2013-06-09 15:52:35 +02:00
Christoph Lohmann
369734c80c Adding xterm behaviour to setting the title.
Thanks Airwave!
2013-06-06 19:09:18 +02:00
Christoph Lohmann
7530694987 Adding true mouse motion support. 2013-06-01 14:37:30 +02:00
Christoph Lohmann
d743b93fda This is a shorter bit handling in MODE_MOUSE. 2013-06-01 13:17:20 +02:00
Christoph Lohmann
317b785921 Add some comments about the other mouse reporting modes. 2013-06-01 13:13:01 +02:00
Christoph Lohmann
405fd89ac1 Implementing mouse focus and all events. 2013-06-01 13:06:53 +02:00
Christoph Lohmann
8315dc4179 Fixing bad highlighting on first SNAP_WORD multiline select. 2013-06-01 12:23:55 +02:00
Christoph Lohmann
b5144100a5 Fixing the selection in a single line again.
Thanks p37sitdu@lavabit.com!
2013-05-26 16:10:22 +02:00
Christoph Lohmann
8f1bef0502 Fixing the selection scrolling and the selection naming.
Thanks p37sitdu@lavabit.com!
2013-05-26 13:07:26 +02:00
Christoph Lohmann
8f47c4a4de Lazy font unloading too. 2013-05-11 21:59:55 +02:00
Christoph Lohmann
62502a88e9 Lazy fontset loading.
Thanks Johannes Hofmann <Johannes.Hofmann@gmx.de>!
2013-05-11 08:54:26 +02:00
Christoph Lohmann
678eff6e18 Removing an old select() regression. 2013-05-06 19:50:14 +02:00
Christoph Lohmann
8e968739c3 Allow more complex delimiters for word selections.
Thanks Alexander Rezinsky <alexrez@gmail.com>!
2013-05-04 19:04:20 +02:00
Christoph Lohmann
0c2b513d01 Expand the last line with '\n' in case of overselection.
Thanks Alexander Rezinsky <alexrez@gmail.com>!
2013-05-04 19:00:32 +02:00
Christoph Lohmann
634c247fa7 Select to the end of row if end of line is reached.
Thanks Alexander Rezinsky <alexrez@gmail.com>!
2013-05-04 08:05:11 +02:00
Christoph Lohmann
5938fa9d32 Better comments for the snapping code. 2013-05-04 08:01:17 +02:00
Christoph Lohmann
8618386de9 More stable blinking. 2013-05-01 13:14:46 +02:00
Christoph Lohmann
911ba5674b Selection snapping is now considering wrapping.
Thanks Alexander Rezinsky <alexrez@gmail.com> for mentioning this!
2013-04-28 18:14:15 +02:00
Christoph Lohmann
a53017c8b4 Add a possibility to modify the string sent by mouse buttons.
Thanks Alexander Rezinsky <alexrez@gmail.com> for the suggestion!
2013-04-28 17:42:30 +02:00
Christoph Lohmann
a77b01176a Be more efficient in blinking. 2013-04-26 18:55:40 +02:00
Christoph Lohmann
1e09726518 Enable blinking in st. 2013-04-26 18:41:54 +02:00
Christoph Lohmann
1b2751f5c2 Fixing the selection handling to allow one char selection.
Thanks Alexander Sedov <alex0player@gmail.com> for suggesting the fix!
2013-04-25 06:28:11 +02:00
Christoph Lohmann
0851f2be2a Fixing the selection issue in altscreens. 2013-04-24 21:30:59 +02:00
Alexander Sedov
011c0f9e5b Removed redundant check in draw code.
We're now clearing empty areas with spaces, so there is no point to check
if character contains non-empty string.

Signed-off-by: Christoph Lohmann <20h@r-36.net>
2013-04-24 21:27:56 +02:00
Roberto E. Vargas Caballero
048c54fd5b Fix selecting clearing and BCE
The commit b78c5085f7 changed the st behaviour enabling BCE capability,
that means erase regions using background color. Problem comes when you
clear a region with a selection, because in this case the real mode of the
Glyph is not the value of term.line[y][x], due in drawregion we had enabled
the ATTR_REVERSE bit.

Signed-off-by: Christoph Lohmann <20h@r-36.net>
2013-04-23 20:36:30 +02:00
Christoph Lohmann
6b03bb769a Now clipping is more clear. 2013-04-23 19:37:28 +02:00
Christoph Lohmann
db6f796ecf Removing the overdrawing of some fonts. 2013-04-23 19:17:50 +02:00
Christoph Lohmann
2bd6afd1c9 Implementing 8 bit mode for meta. 2013-04-23 15:22:14 +02:00
Christoph Lohmann
b596d6ba3c Adding wrap handling in selection. 2013-04-21 13:01:16 +02:00
Alexander Sedov
872a7f18ea Added support for double/triple click+dragging.
Now double-click+dragging automatically snaps both ends to word boundaries
(unless on series of spaces), and triple-click selects whole lines.
As a side effect, snapping now occurs on button press, not button release
like it previously was, but I hope that won't be inconvenient for anyone.

Signed-off-by: Christoph Lohmann <20h@r-36.net>
2013-04-20 15:54:19 +02:00
Alexander Sedov
e5ff746430 Selection now handles empty lines less counter-intuitively.
Now, when you are selecting a region, you will get all empty lines that happen
to be in it, including trailing ones. Last line terminator is omitted as it previously
was, though.

Signed-off-by: Christoph Lohmann <20h@r-36.net>
2013-04-18 16:51:52 +02:00
Christoph Lohmann
da182612b7 Removing trailing whitespace. 2013-04-18 06:51:18 +02:00
Alexander Sedov
b7e6a5c825 Got rid of redundant Glyph state.
Now, newly allocated Glyphs are set to spaces and current cursor colors
with tclearregion() routine.

Signed-off-by: Christoph Lohmann <20h@r-36.net>
2013-04-18 06:48:06 +02:00
Christoph Lohmann
3ae0299064 Removing unneeded comments. 2013-04-18 06:41:54 +02:00
Alexander Sedov
fed9968ba5 Got rid of code duplication in tnew() and tresize().
Signed-off-by: Christoph Lohmann <20h@r-36.net>
2013-04-18 06:39:43 +02:00
Alexander Sedov
0ca0dd8b11 Strip trailing spaces from lines when copying selection.
Signed-off-by: Christoph Lohmann <20h@r-36.net>
2013-04-14 21:32:53 +02:00
Christoph Lohmann
c371fe58a3 Enable BCE everywhere. 2013-04-14 18:30:10 +02:00
Christoph Lohmann
44db38a5f8 Fix the geometry handling. 2013-04-13 15:24:26 +02:00
Christoph Lohmann
de4cd2f6af Resize now uses xclear(). 2013-04-13 09:49:11 +02:00
Christoph Lohmann
1e7816c202 Drawing a more visible rectangle as cursor on unfocus.
To have a more visible cursor on unfocused windows this patch makes st draw a
rectangle around the terminal cell.

Thanks Mark Hills <mark@xwax.org> for the suggestion!
2013-04-13 09:44:00 +02:00
Christoph Lohmann
5dc48af29e Patching while not really woken up. 2013-04-13 08:51:30 +02:00
Christoph Lohmann
5984657c00 Minor naming issue fixed. 2013-04-13 08:50:38 +02:00
Christoph Lohmann
4018b2c507 Making the copy and pasting consistent.
The copying and pasting in the terminald and GUI world is flawed. Due to the
discussion on the mailinglist it seems that sending '\n' is what GUIs expect
and '\r' what terminal applications want. St now implements that behaviour.
2013-04-13 08:48:17 +02:00
Christoph Lohmann
684cf55a0d Make st work with a plain -e command. 2013-04-10 17:48:32 +02:00
Christoph Lohmann
b1813b14d9 Adopting arg.h with more flexible cmd handling. 2013-04-03 21:00:38 +02:00
Christoph Lohmann
580c8bbd46 Add an option to disable alternative screens. 2013-04-03 20:42:27 +02:00
Christoph Lohmann
7e7760c2ed Add the possibility to have default highlight colors.
Thanks to stargrave@stargrave.org for the suggestion!
2013-03-29 19:01:24 +01:00
Christoph Lohmann
a1e3b94b37 Removing an undefined case. just do regular selections. 2013-03-29 18:39:01 +01:00
Christoph Lohmann
4b17dddb10 Making rectangular selection work again.
People sending me patches against strange revisions and basing on their own
revisions make me having to reapply them. Then such errors appear.

Thanks Alexander Sedov <alex0player@gmail.com> for noticing this.
2013-03-20 21:19:28 +01:00
Christoph Lohmann
55adf0aad1 Pange seems to use ascent + descent instead of height.
Thanks Bobby Powers <bobbypowers@gmail.com> for noticing this!
2013-03-10 21:16:51 +01:00
Christoph Lohmann
c6b89f23e7 Using strsep and fixing null termination in csiparse.
Thanks for the hint from Alexander Sedov <alex0player@gmail.com>!
2013-02-26 21:43:40 +01:00
Christoph Lohmann
1c1621da69 Changing the way how paste is handled, just for the nano people. 2013-02-26 19:08:51 +01:00
Christoph Lohmann
1aa26b4ecd Fixing a bug while parsing empty arguments in csiparse. 2013-02-26 19:07:23 +01:00
Christoph Lohmann
7d32471eff Fixing bugs in the strtol and strtok_r replacements.
Thanks "Roberto E. Vargas Caballero" <k0ga@shike2.com> for the comments!
2013-02-26 18:19:44 +01:00
Christoph Lohmann
7cb0d95509 Using strtok_r for the string parsing. 2013-02-25 13:36:40 +01:00
Christoph Lohmann
37863356b0 Using strtol with overflow checking. 2013-02-25 13:23:56 +01:00
Christoph Lohmann
be7c6d7fb0 Add insert for the primary clipboard to MOD + Shift + Ins.
Thanks Mantas Mikulėnas <grawity@gmail.com> for the patch!
2013-02-23 21:50:13 +01:00
Christoph Lohmann
e40d8da194 Removing dbe and introducing umlauts to titles.
Thanks Alexander Sedov <alex0player@gmail.com> for the title patch!
2013-02-23 21:44:06 +01:00
Christoph Lohmann
efaf1c2a94 Add umlaut support for title change.
Thanks Alexander Sedov <alex0player@gmail.com>!
2013-02-23 21:20:21 +01:00
Christoph Lohmann
1b6c6535c1 Replace parse_int with atoi(). 2013-02-23 21:17:25 +01:00
Alexander Sedov
800800a3bb Added basic xterm-ish palette swap support.
Signed-off-by: Christoph Lohmann <20h@r-36.net>
2013-02-19 19:12:42 +01:00
Christoph Lohmann
3865e9eaaf Implement rectangular mouse selection.
Thanks Alexander Sedov <alex0player@gmail.com>!
2013-02-19 19:08:41 +01:00
joe9
e5295629cd ensure that the italic font has the same weight as the normal font
The specified font[] pattern need not have a medium weight. It could be
specified as a number too or have a different weight other than medium.

Signed-off-by: Christoph Lohmann <20h@r-36.net>
2013-02-19 16:09:05 +01:00
Christoph Lohmann
0e738c3d72 Style inquisition. 2013-02-19 16:04:54 +01:00
Christoph Lohmann
7f297e297c Fixing the reverse mode of st colors.
Thanks Alexander Sedov <alex0player@gmail.com> for finding this!
2013-02-19 15:51:25 +01:00
Christoph Lohmann
f4a6c20f46 Adding a way to ignore bits in the state. 2013-02-16 13:57:12 +01:00
Christoph Lohmann
e0ec2cf984 Style inquisition. 2013-02-15 19:36:20 +01:00
Christoph Lohmann
086cd61511 Doing it like the new run() was proposed. 2013-02-15 19:30:43 +01:00
Christoph Lohmann
95033753be Adding a more efficient drawing code.
Thanks Mihail Zenkov <mihail.zenkov@gmail.com> for giving the hint!
2013-02-15 19:10:22 +01:00
Christoph Lohmann
b7261c84aa Tmux wants this to be mutually exclusive.
Thanks Egmont Koblinger <egmont@gmail.com> for noticing this!
2013-02-15 17:45:38 +01:00
Christoph Lohmann
05a1ff03e9 Adding mor explict font patterns. 2013-02-13 21:35:27 +01:00
Christoph Lohmann
eeffbe11ab Making st not activate the cursor in case of Mod + k in dwm.
Thanks Jens Nyberg <jens.nyberg@gmail.com>!
2013-02-11 22:20:16 +01:00
Christoph Lohmann
8a9475a0dd Setting the surrounding border to defaultbg.
Thanks Stephen Caraher <moskvax@gmail.com>!
2013-02-10 16:36:03 +01:00
Christoph Lohmann
ce3efa9e9b Removing some debug messages. 2013-02-08 20:24:26 +01:00
Christoph Lohmann
efd04ccad6 Fixing the menus in mc. 2013-01-27 17:48:01 +01:00
Christoph Lohmann
26c101b706 Fixing the black remaining lines in mc and dialog.
This also applies some style fixes and handles some old blink codes.
2013-01-27 13:26:06 +01:00
Christoph Lohmann
384fabdb5b Adding extended mouse reporting in st.
Thanks Egmont Koblinger <egmont@gmail.com>!
2013-01-26 15:13:56 +01:00
Christoph Lohmann
deb720af7f Removing the debug messages again. 2013-01-20 17:13:48 +01:00
Christoph Lohmann
57f39defaf Fixing the clipboard copying to st itself. 2013-01-20 17:12:41 +01:00
Christoph Lohmann
3036051fb1 St is in 2013 now. 2013-01-20 15:12:45 +01:00
Christoph Lohmann
b78c5085f7 Implementing Back Color Erase (BCE). 2013-01-20 14:54:35 +01:00
Christoph Lohmann
b4b513c791 Make line drawing work again. 2013-01-19 18:38:28 +01:00
Christoph Lohmann
15c2bff9fa Yes, xft should be on the buffer. Thanks Mihail Zenkov. 2013-01-19 15:49:34 +01:00
Christoph Lohmann
c7b033b8f0 Trying out the double buffering without dbe. 2013-01-19 15:00:16 +01:00
Christoph Lohmann
0e232a4115 Dbe is not required anymore. 2013-01-19 09:13:52 +01:00
Christoph Lohmann
ed90afb743 The title can now be set with UTF-8 characters.
Thanks Mihail Zenkov <mihail.zenkov@gmail.com>!
2013-01-18 19:11:25 +01:00
Christoph Lohmann
1827e0643f Standout mode has changed. Thanks p37sitdu@lavabit.com! 2013-01-08 20:36:49 +01:00
Christoph Lohmann
b3326ab63b A different double buffering strategy so the background is default set. 2013-01-08 20:09:33 +01:00
Christoph Lohmann
b233007e0f Damn, my fault. The cache should have at least some entries. 2013-01-05 20:56:58 +01:00
Christoph Lohmann
c772a6e571 Applying the changes to the docs; by Peter Hartman. 2013-01-05 20:30:25 +01:00
Christoph Lohmann
4e14a4a97f A fix for the XopenIM() errors. 2013-01-01 13:15:43 +01:00
Christoph Lohmann
c99db5b017 Increasing font cache for speeding up UTF8 demos. 2012-12-30 17:35:41 +01:00
Christoph Lohmann
44e1b79abf Removing the warning about extents. 2012-12-30 17:35:15 +01:00
Christoph Lohmann
08e06ef079 Fixing the font unloading in case of zoom. 2012-12-29 16:24:33 +01:00
Christoph Lohmann
addc848345 Speeding up the drawing, then all characters are known. 2012-12-29 15:03:03 +01:00
Christoph Lohmann
9c44229c62 Adding fallback support to st. 2012-12-28 23:52:04 +01:00
Christoph Lohmann
082bab29f3 Fixing a compile error. 2012-12-22 19:50:02 +01:00
Christoph Lohmann
ac4c6da4ef Fixing a off-by-one error in the penultimate row drawing. 2012-12-22 13:39:27 +01:00
Christoph Lohmann
4d37763ee7 Fixing a precedence problem. Thanks tridactyla! 2012-12-18 13:00:00 +01:00
Christoph Lohmann
fc2b366968 Checking for the lower X11 special keys too. Thanks Benjamin R. Haskell! 2012-12-13 20:57:15 +01:00
Christoph Lohmann
3c6ec1995d Adding error checks for XCreateIC and XOpenIM. 2012-12-11 08:32:08 +01:00
Christoph Lohmann
2696f81875 Be careful about mar77i's patches. 2012-12-10 23:02:58 +01:00
Christoph Lohmann
78215c8ee0 Fixing the nasty selection bug. Thanks p37sitdu@lavabit.com! 2012-12-10 20:45:46 +01:00
Christoph Lohmann
373a8f5628 The style inquisition was here. 2012-11-25 09:23:34 +01:00
Roberto E. Vargas Caballero
172f65436c Add key for toogling numlock handling
Keypad will generate keycodes when keypad application mode is enabled. It
can cause problems with some programs like vi, which operates in such
mode.

This patch change by default don't generate the keycodes never, but this
behaviour can be changed using the combination Alt + NumLock.
---
 config.def.h |   34 ++++++++++++++++++----------------
 st.c         |   17 +++++++++++++++--
 2 files changed, 33 insertions(+), 18 deletions(-)
2012-11-25 09:23:02 +01:00
Christoph Lohmann
b26df1d0d3 Fixing the calculation of the base tty pixel size. 2012-11-21 20:38:15 +01:00
Christoph Lohmann
440a19a662 Getbuttoninfo is always used the same and just a helper function. Shrinking it
a bit. Thanks nsz!
2012-11-15 21:42:58 +01:00
Roberto E. Vargas Caballero
6312f76ca4 Fix speech error in comment
---
 st.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
2012-11-15 20:57:37 +01:00
Roberto E. Vargas Caballero
0df350cd0b Remove unused fields in cursor_movement
---
 st.c |    4 ----
 1 file changed, 4 deletions(-)
2012-11-15 20:57:33 +01:00
Christoph Lohmann
1cea02be8d Removing my debug fprintf(). 2012-11-15 20:25:16 +01:00
Christoph Lohmann
2b6521f5d2 Optimizing the key lookup to the X11 function key. It is still possible to
remap other keys.
2012-11-15 20:19:35 +01:00
Roberto E. Vargas Caballero
90e1427632 Fix Shift + Insert shortcut
This patch apply the same code for shortcuts that it is used now for defined
keys. So it is possible use now XK_NO_MOD and XK_ANY_MOD for defining shortcuts.
---
 st.c |   35 ++++++++++++++++++++---------------
 1 file changed, 20 insertions(+), 15 deletions(-)
2012-11-15 19:01:16 +01:00
Christoph Lohmann
d5640c7729 Fixing the return and keypad enter sent characters. Terminals produce \r. And
some minor style changes.
2012-11-15 16:26:50 +01:00
Christoph Lohmann
801ea034b6 Import the patch of Eckehard Berns to add insert mode. Thanks! 2012-11-15 16:21:23 +01:00
Roberto E. Vargas Caballero
88bb76c1bc Fix XK_NO_MOD and XK_ANY_MOD behavior
XK_NO_MOD match a key without modifiers and XK_ANY_MOD match a key does not
matter what modifiers are pressed to. Like they are mask the best value for
XK_ANY_MOD is all the bits to 1, so the and with any state will be equal to
the state. This also imply that is necessary check the case for XK_NO_MOD
(no modifiers at all) with some modifier in state, and the inverse
(some mask different to XK_ANY_MOD or XK_NO_MOD and no modifiers in state).
---
 st.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
2012-11-15 15:36:13 +01:00
Roberto E. Vargas Caballero
16ccf344de Fix tab key
When Shift + Tab is pressed X server send the event XK_ISO_Left_Tab with
ShiftMask, so this is the entry we need in config.def.h

This patch also revert the previous patch for this issue because it breaks
the keyboard.
---
 config.def.h |    2 +-
 st.c         |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
2012-11-14 11:14:29 +01:00
Christoph Lohmann
461aac159c Fixing the tab key, when no mask is wanted. 2012-11-14 06:37:24 +01:00
Christoph Lohmann
7474a2fc37 The style inquisition was here again. 2012-11-13 20:13:39 +01:00
Roberto E. Vargas Caballero
ea782bfc5d Remove hardcoded keys form kpress
Some keys were in the Key array while others were hardcoded in
kpress().This cause some problems with some keys which can generate more of
one string based in the configuration of the terminal.
---
 config.def.h |   70 ++++++++++++++++++++++++++++++++++++++++-----------------
 st.c         |   71 +++++++++++++++++++++++++---------------------------------
 2 files changed, 79 insertions(+), 62 deletions(-)
2012-11-13 20:04:45 +01:00
Roberto E. Vargas Caballero
93f31166bf Move Shift + Insert to shortcut
Shift + Insert is used like a hot key for paste the selection, so it is more
logical move it to shortcut array instead of having special code for it.
---
 config.def.h |    1 +
 st.c         |   13 +++----------
 2 files changed, 4 insertions(+), 10 deletions(-)
2012-11-13 20:04:39 +01:00
Roberto E. Vargas Caballero
69ee3ba3a7 Fix keypad mode and cursor mode
Keypad mode is used for detecting when keys in the auxiliary keypad are
pressed, while cursor mode is used for detecting when a cursor is pressed,
but they are different modes.

St was mixing both modes and DECPAM and DECPNM modified the cursor mode, and
this was incorrect.
---
 st.c    |    5 +++--
 st.info |    4 ++--
 2 files changed, 5 insertions(+), 4 deletions(-)
2012-11-13 20:04:34 +01:00
Roberto E. Vargas Caballero
73177ba366 Add SRM sequence
This sequence enable/disable the local echo.
---
 st.c |   76 ++++++++++++++++++++++++++++++++++++++++++++++++------------------
 1 file changed, 56 insertions(+), 20 deletions(-)
2012-11-13 20:04:26 +01:00
Christoph Lohmann
ace789a79f Gc is not used anymore. 2012-11-11 19:46:34 +01:00
Christoph Lohmann
c4a9ccec19 Removing some xft naming cruft. 2012-11-11 19:38:41 +01:00
Christoph Lohmann
5d5a7c627a Moving the alt declaration to the beginning of the function. 2012-11-08 17:22:48 +01:00
Roberto E. Vargas Caballero
8665905216 Move unsupported sequences to ignored.
These sequences will be never implemented and in this moment they are
generating a lot of noise.
---
 st.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
2012-11-08 17:22:04 +01:00
Roberto E. Vargas Caballero
27468403cc Ignore DECARM sequence
DECARM modify the auto repeat settings in the keyboard, and since we can not
modify this setting in the Xserver the best solution is only ignore it.
---
 st.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
2012-11-08 17:21:41 +01:00
Roberto E. Vargas Caballero
d5b80e05e8 Fix VPR sequence
VPR stands for Move cursor down a number of rows, and the code was moving
the cursor up instead of moving it down.
---
 st.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
2012-11-08 17:21:24 +01:00
Roberto E. Vargas Caballero
5260a9ea22 Add DECOM sequence
DECOM sequence allows to the user defines a new home position. The home
position is used as base for all the movement commands except HVP and
VPA. It is important notice than DECSLM moves cursor to absolute position
0,0.
---
 st.c |   33 ++++++++++++++++++++++++++-------
 1 file changed, 26 insertions(+), 7 deletions(-)
2012-11-08 17:21:10 +01:00
Roberto E. Vargas Caballero
ee3e0a9fd0 Save cursor position in terminal reset
After terminal reset saved terminal position is reset to 0, allowing know
where cursor will go in next restore cursor operation.
---
 st.c |    2 ++
 1 file changed, 2 insertions(+)
2012-11-08 17:20:15 +01:00
Roberto E. Vargas Caballero
ba9d0365ac Clarify some or exclusive expressions
Since relational expresions are always evaluated to 0 or 1, we can use
bitwise xor operator instead of using more complex boolean expressions.
---
 st.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
2012-11-08 17:17:26 +01:00
Roberto E. Vargas Caballero
950ff21e17 Fix bug restoring cursor position
Sequences like DECSC, DECRC, ESC [?1047l or ESC [?1047h save and restore
cursor attributes, than taken from vt100 manual are:

       Save Cursor (DECSC) ESC   7
       ===========================
       Saves the following in terminal memory.

      - cursor position
      - graphic rendition
      - character set shift state
      - state of wrap flag
      - state of origin mode

      Restore Cursor (DECRC) ESC 8
      ===========================
      Restores the states described for (DECSC) above. If none of these
      characteristics were saved, the cursor moves to home position; origin
      mode is reset; no character attributes are assigned; and the default
      character set mapping is established.

This implies that hide attribute of the cursor should not be saved/restored
in these sequences. The best way to fix this problem is moving hide
attribute into the terminal mode, instead of having it in the cursor state.
---
 st.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
2012-11-08 17:15:26 +01:00
Christoph Lohmann
5d39afc902 Adding scrollwheel support. Thanks Brandon Invergo! 2012-11-06 23:44:37 +01:00
Christoph Lohmann
0fbe1559c8 Fixing meta+return. Thanks Szabolcs Nagy! 2012-11-04 00:04:56 +01:00
Christoph Lohmann
86261187ab Removing the debugging for the last fix too. 2012-11-03 14:05:45 +01:00
Christoph Lohmann
9888c5064b Fixing a resize bug, if a smaller amount than the lineheight is resized.
Thanks c00kiemon5ter!
2012-11-03 14:05:15 +01:00
Christoph Lohmann
f8db65439a Fixing bold fonts in reverse mode. 2012-11-03 13:43:20 +01:00
Christoph Lohmann
76a8e5f72b Now italic and bold works. 2012-11-03 08:35:32 +01:00
Christoph Lohmann
abe85c0e99 Fixing an out-of-bound bug in the selection code. Thanks Szabolczs Nagy! 2012-11-03 03:24:22 +01:00
Christoph Lohmann
091ae143ce Fixing the italic-bold font check. Thanks nsz. 2012-11-02 23:19:56 +01:00
Christoph Lohmann
c631e9bb91 Make it possible to use the corefont font description too. It is not very
useful, but easy to implement.
2012-11-02 20:07:11 +01:00
Christoph Lohmann
393825f9f8 Moving to the dwm config.h variable usage. 2012-11-02 19:56:02 +01:00
Christoph Lohmann
c5dd7fb377 Applying the patch of the little girl <yui@blekksprut.net> to make cjk input
possible. Thanks!
2012-10-28 13:37:11 +01:00
Christoph Lohmann
b56a0da283 Applying the tab expansion patch from koga. 2012-10-28 13:35:00 +01:00
Christoph Lohmann
71b09ec4f1 Adding a more flexible fontstring handling, shortcuts and a zoom function. 2012-10-28 13:25:53 +01:00
Christoph Lohmann
6d4e525ed9 Applying the patch of Roberto Caballero to set WINDOWID and all the pwuid()
variables. Thanks! xinit() and ttynew() had to be switched in their
call-appearance. Otherwise xw.win is not set.
2012-10-28 06:54:08 +01:00
Christoph Lohmann
35421371ca Applying the patch of Rafa Garcia Gallega <rafael.garcia.gallego@gmail.com> to
not emulate the vt100 behaviour of selecting all whitespaces. Thanks!
2012-10-28 06:32:54 +01:00
Roberto E. Vargas Caballero
ee3fbeb6c8 Add error control to iofile
write can write less bytes than we request, so it is necessary check the
return value, in case of error print a message and don't continnue writing
in the file.
---
 st.c |   39 ++++++++++++++++++++++++++++++---------
 1 file changed, 30 insertions(+), 9 deletions(-)
2012-10-28 06:27:42 +01:00
Christoph Lohmann
2e38ab7afd Well, I was confused. Damn state exams. Instead of discussing this shit I
should really learn opthalmology instead. :O
2012-10-09 19:40:37 +02:00
Christoph Lohmann
eb6713acf1 If there is really someone without SHELL set, help him/her. 2012-10-09 19:33:26 +02:00
Roberto E. Vargas Caballero
9e813947cf Add DEC alignment test
This sequence was used by DEC personal in to for verifying the screen adjust
of terminals. It is the unique test sequence implemented by all the
emulators, and I think it is because they want be conforms with vttest which
uses this sequence in some tests.
---
 st.c |   31 +++++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 8 deletions(-)
2012-10-07 11:06:17 +02:00
Roberto E. Vargas Caballero
b7a7f171ef Avoid initialization of vt100_0 in each call to tsetchar
If vt100_0 is a automatic variable then it is initializated in each call to
tsetchar, but if the variable is static it is initializated only in compile
time.
---
 st.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
2012-10-07 11:06:08 +02:00
Roberto E. Vargas Caballero
25f47cb83a Fix Identification sequences
Do not send NUL character in the identification (use (sizeof(VT102ID) - 1),
and finish  the sequence once you execute it.
---
 st.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
2012-10-07 11:06:00 +02:00
Roberto E. Vargas Caballero
ffeeb678c5 Add DA and DECID sequences
These sequences are used by the host in order to can detect which kind of
terminal is connected. St will answer like a vt102 terminal with this patch.
---
 st.c |    9 +++++++++
 1 file changed, 9 insertions(+)
2012-10-06 21:19:56 +02:00
Christoph Lohmann
bffa6e5cc6 Fixing a typo. 2012-10-06 21:02:25 +02:00
Christoph Lohmann
b16b5d77d3 Fixing a off-by-one error in the new border clearing code. 2012-10-06 20:52:22 +02:00
Roberto E. Vargas Caballero
2bd0c23fa7 Print control codes only in graphic mode
Non handled codes must be ignored, except in graphic mode. Also STR
sequences have higher priority than control codes, so they must be handled
before of them.
---
 st.c |  160 ++++++++++++++++++++++++++++++++++++------------------------------
 1 file changed, 87 insertions(+), 73 deletions(-)
2012-10-06 19:15:30 +02:00
Roberto E. Vargas Caballero
034dc71fb8 Add SI and SO control codes
SI and SO allows change the G0 and G1 selection. This implementation is not
full vt100 compatible, but it is complatible with linux virtual terminal
implementation. For full vt100 compatibility we need remake a lot of stuff
relate to the different charmaps.
---
 st.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
2012-10-06 19:13:36 +02:00
Roberto E. Vargas Caballero
fbfa1f83eb Add SUB and CAN control codes
These control codes reset any escape sequence already initialised.
---
 st.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
2012-10-06 19:13:08 +02:00
Roberto E. Vargas Caballero
ac8f05c45a Add documentation to control codes
Add the documentation from the vt100 manual programmer:

Control 	Octal      Action Taken
Character	Code
-------------------------------------------
NUL		000	Ignored on input (not stored in input buffer;
			see full duplex protocol).
ENQ		005	Transmit answerback message.
BEL		007	Sound bell tone from keyboard.
BS		010	Move the cursor to the left one character position,
			unless it is at the left margin,
			in which case no action occurs.
HT		011	Move the cursor to the next tab stop,
			or to the right margin if no further tab stops
			are present on the line.
LF		012	This code causes a line feed or
			a new line operation. (See new line mode).
VT		013	Interpreted as LF.
FF		014	Interpreted as LF.
CR		015	Move cursor to the left margin on the current line.
SO		016	Invoke G1 character set, as designated by SCS
			control sequence.
SI		017	Select G0 character set, as selected by ESC ( sequence.
XON		021	Causes terminal to resume transmission.
XOFF		023	Causes terminal to stop transmitted all codes
			except XOFF and XON.
CAN		030	If sent during a control sequence, the sequence is
			immediately terminated and not executed. It also causes
			the error character to be displayed.
SUB		032	Interpreted as CAN.
ESC		033	Invokes a control sequence.
DEL		177	Ignored on input (not stored in input buffer).
--------------------------------------------
---
 st.c |   28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)
2012-10-06 19:12:46 +02:00
Christoph Lohmann
02f3b37a2d Forgot to remove the xclearborders() definition from the last commit. 2012-10-06 13:45:14 +02:00
Christoph Lohmann
0cc7ee5e73 Removing the xclearborders() hack. St now cleans up the parts of the border,
if something needs to be drawn close to it.
2012-10-06 13:43:01 +02:00
Christoph Lohmann
4eddf19fdc The style inquisition was here. Yes, making it a unified style. The last
infidels will be squashed too!
2012-10-06 09:58:45 +02:00
Christoph Lohmann
7efa4514d1 Adding the patch of David Dufberg Töttrup to implement WM_DELETE_WINDOW. Thank you! 2012-10-05 22:59:08 +02:00
Christoph Lohmann
bf6cf05ba5 Fixing the brightening on bold. For the 256 colors and greyscale I assumed a
reasonable solution.
2012-10-05 22:51:08 +02:00
Christoph Lohmann
0b489c4a6a When the drawing behaviour was changed underline was not corrected.
Thanks to Peter A. Shevtsov!
2012-10-05 09:38:10 +02:00
Christoph Lohmann
2752018e27 This adds the fontcache dependency to try something out. Additionally the
invert mode now works as expected. In the config.def.h autohint is set to
false, so the fonts are drawn correctly, without any overlapping.
2012-10-04 22:59:45 +02:00
Christoph Lohmann
0d88f1ef75 Thanks to c00kiemon5ter. Not changing bold to bright colors seems to be the
right choice.
2012-10-02 12:48:55 +02:00
Christoph Lohmann
5dfd5df4fe This changes -f to be the parameter for the font. Now -f is -o.
The parameters were reordered according to the alphabet too.
2012-09-30 20:23:10 +02:00
Christoph Lohmann
9cae1eb0de Remove the cruft of the user to have to define the different font styles. 2012-09-30 20:10:58 +02:00
Christoph Lohmann
ed5b8700a6 We need all the colors to be available, so die() on some not available.
This is a new opportunity to see if X11 somewhen handled colors in a strange
way.
2012-09-29 11:23:34 +02:00
Christoph Lohmann
d7b1e31eec All xcolors are not Xft colors and the clearing of the borders has been
optimized. There is a speedup when resizing windows.
2012-09-29 11:17:16 +02:00
Christoph Lohmann
29b209f5f5 Vt escape sequences allow escape sequences in escape sequences and escape
sequences, so we have to support escape sequences in escape sequences that
escape sequences in escape sequences – setting a title won't notify you
anymore.
2012-09-27 19:28:44 +02:00
Roberto E. Vargas Caballero
3af49e34f6 Allow control characters inside escape sequences
Taken from vt100 manual programmer:

	Control characters (codes \0 to \37 inclusive) are specifically
	excluded from the control sequence syntax, but may be embedded
	within a control sequence. Embedded control characters are executed
	as soon as they are encountered by the VT100. The processing of the
	control sequence then continues with the next character received.
---
 st.c |   68 +++++++++++++++++++++++++++++++++---------------------------------
 1 file changed, 34 insertions(+), 34 deletions(-)
2012-09-26 20:55:18 +02:00
Roberto E. Vargas Caballero
a7d7e29300 Ignore all control characters not handled
Taken from vt100 programmer manual:

	Control characters have values of \000 - \037, and \177. The control
	characters recognized by the VT100 are shown in Table 3-10. All
	other control codes cause no action to be taken.

We have to take attention when we are using alternate charset, because in
this cases they are not used as control characters.
---
 st.c |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
2012-09-26 20:53:46 +02:00
Christoph Lohmann
3a095984b0 Implementing line drawing right. 2012-09-26 20:21:08 +02:00
Christoph Lohmann
c3b0e2202b A reset should reset the line drawing too. 2012-09-25 21:39:25 +02:00
Christoph Lohmann
980c5956ed Enabling enacs and adding compatibility to xterm and urxvt for alternative
charsets.
2012-09-25 21:17:43 +02:00
Roberto E. Vargas Caballero
eb360e5fd1 Fix bug in tputc writing to io file
If -f options is enabled then tputc() writes all the data to a file. Actual
code assumes that all the strings in 'c' parameters have always 1 byte
length, but this is not always true, because due to utf-8 encoding some
characters can have a diferent length. So it is necessary pass string length
to tputc in order it can call to write() correctly.
---
 st.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
2012-09-25 21:04:35 +02:00
Christoph Lohmann
055a4f6d2c The xinit() call needs to be behind all the tty init, otherwise all the
allocated structures are wrong. The xclear() is now done on purpose. Please
keep X11 calls out of the way of pure tty-related calls.
2012-09-24 11:04:26 +02:00
Roberto E. Vargas Caballero
74d6abfee5 Add some documentetion to tsetmode
The names of the terminal modes supported by vt102 are (taken from the VT220
programmer reference manual):

Table 4-7 ANSI-Standardized Modes
Name  Mnemonic		    Parameter (Ps)
Error (ignored)		    -         0 (3/0)
Keyboard action		    KAM	      2 (3/2)
Insert/replace		    IRM	      4 (3/4)
Send/receive		    SRM	      12 (3/1 3/2)
Line feed/new line	    LNM       20 (3/2 3/0)

Table 4-8 ANSI-Compatible DEC Private Modes
Name  Mnemonic		  Parameter (Ps)
Error (ignored)		  -	    0 (3/0)
Cursor key		  DECCKM    1 (3/1)
ANSI/VT52		  DECANM    2 (3/2)
Column			  DECCOLM   3 (3/3)
Scroll			  DECSCLM   4 (3/4)
Screen			  DECSCNM   5 (3/5)
Origin			  DECOM	    6 (3/6)
Auto wrap		  DECAWM    7 (3/7)
Auto repeat		  DECARM    8 (3/8)
Printer form feed	  DECPFF    18 (3/1 3/8)
Printer extent		  DECPEX    19 (3/1 3/9)
Text cursor enable	  DECTCEM   25 (3/2 3/5)
National replacement character sets DECNRCM 42 (3/4 3/2)

This patch adds a comment for each one of these sequences.
---
 st.c |   26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)
2012-09-24 10:29:37 +02:00
Roberto E. Vargas Caballero
c3b6345595 Fix LNM sequence
LNM sequence is a standard ANSI mode, not a DEC private mode.
---
 st.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
2012-09-24 10:28:35 +02:00
Roberto E. Vargas Caballero
2f215654a4 Add KAM sequence
This sequence lock/unlock the keyboard ignoring all the key pressing events
from X server.
---
 st.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
2012-09-24 10:28:05 +02:00
Roberto E. Vargas Caballero
11bec67875 Remove unused parameters in ttyresize
---
 st.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
2012-09-24 10:27:22 +02:00
Roberto E. Vargas Caballero
b6cfff1625 Clear X window in tsetreset()
tsetreset() is called when it is necessary a full initialization of the
terminal, so it also should clean the full X window and not only the
terminal content. It is necessary change the order of the
initialization in main(), and put xinit before of tnew(), because tnew()
calls to tsetreset(), and  this can cause a call to xreset() with
incorrect values.
---
 st.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
2012-09-24 10:26:50 +02:00
Christoph Lohmann
21a0c4a2e0 Merging xft and current st heads. 2012-09-24 10:24:36 +02:00
Christoph Lohmann
2b3c1219c8 Initial Xft support for st. More to follow. 2012-09-24 10:20:45 +02:00
Aurélien Aptel
816a70c01b use typedef'd unsigned type and regular bool type. 2012-09-19 16:03:16 +02:00
Christoph Lohmann
e4bf2679c1 Fixing the redrawing patch of k0ga, so it's using xclear() in redraw() too. 2012-09-17 22:44:27 +02:00
Roberto E. Vargas Caballero
4876d6e05b Clean windows display after resizing
Some times the size after a resizing is not an exact multiply of a number of
characters, so redrawn the screen using the lines and columns of the neww
size can cause that some old graphics keep in the screen. Solution is clean
all the windows with the background color.
---
 st.c |    3 +++
 1 file changed, 3 insertions(+)
2012-09-17 22:13:17 +02:00
Roberto E. Vargas Caballero
88a8f85a8a Copy non set positions as spaces
st selection don't insert in the selection position whose value is not
set. This is correct for the positions in the end of the line, but cause
some problems in the beginning. For example echo -e 'a\tb' will print in the
screen:

a	b

but after selecting and copying in some place you get:

ab

because positions from 1 to 7 don't have any value. This patch deals all
positions without value as blank (even at the end of the line).
---
 st.c |   17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)
2012-09-17 22:13:09 +02:00
Roberto E. Vargas Caballero
111199cf22 Add newline in error messages
---
 st.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
2012-09-17 22:11:28 +02:00
Roberto E. Vargas Caballero
e3671006db Add xcalloc wrapper
malloc and realloc are called through xmalloc and xrealloc, so calloc should
be called through xcalloc.
---
 st.c |   13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)
2012-09-17 22:11:20 +02:00
Christoph Lohmann
426887ccec Applying a shortening proposal for the run loop of k0ga. 2012-09-16 20:43:51 +02:00
Roberto E. Vargas Caballero
58a57a2305 Remove call to draw in resize
In previous commits draw was removed from all the X events, but I forgot do
it in resize.
---
 st.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
2012-09-16 14:02:35 +02:00
Christoph Lohmann
9fbafe55c9 Preliminary solution to the stuttering problem. 2012-09-16 13:22:23 +02:00
Roberto E. Vargas Caballero
d81250e5f9 Fix selection bug
After the commit named "Remove timeout in the main loop", selection is not
working in the proper way. After selecting something, press mouse button in
a line outside of selection causes an incorrect highlight. This patch fix
the problem forcing a draw after the press event, but this is only a fast
hack. Real solution means rewriting selection code.
---
 st.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
2012-09-16 10:49:12 +02:00
Roberto E. Vargas Caballero
c5a9b799d4 Render only once in each main loop iteration
draw() runs over all lines of the screen and renders only the dirty lines,
this avoids render lines which are not modified since last draw() call. In
this moment the main loop is something like:

     - Wait something to read from file descriptors
     - Read from pseudo tty
     - Call draw() for rending
     - Read X events

This cause the problem that all the X events that have to update the screen
have to call draw() (because draw() is called before of X events handling),
so you can have multiples renderings in only one iteration, that will waste
a lot of resources.

This patch change the main loop to:

     - Wait something to read from file descriptors
     - Read from pseudo tty
     - Read X events
     - Call draw() for rending

So X events don't have to worry about rendering, because draw() is called
after them.

The only place where draw is called outside of the main loop is in redraw(),
but it is necessary for getting a good tput flash.
---
 st.c |   29 ++++++-----------------------
 1 file changed, 6 insertions(+), 23 deletions(-)
2012-09-16 10:48:38 +02:00
Roberto E. Vargas Caballero
85849ce72a Remove timeout in the main loop
The main loop waits until there is some data to read in file descriptors of
the X server or the pseudo tty. But it uses a timeout in select(), which
causes that st awake each 20 ms, even it doesn't have something to do. This
patch removes this problem removing the timeout, which is not needed.
---
 TODO |    1 -
 st.c |   27 +++------------------------
 2 files changed, 3 insertions(+), 25 deletions(-)
2012-09-16 10:47:21 +02:00
Roberto E. Vargas Caballero
15cc8754c2 Call XSync in redraw
It is necessary call to XSync if you want a good tput flash, because in
other way you can not be sure that white screen will be shown.
---
 st.c |    1 +
 1 file changed, 1 insertion(+)
2012-09-16 10:46:08 +02:00
Roberto E. Vargas Caballero
ba1e9daeef Call XdbeQueryExtension before of calling any Xdbe function
XdbeQueryExtension() tells to the caller if the Xdbe extension is present in
the X server, so it should be called for sanity. But like is said in
XdbeQueryExtension(3):

	No other Xdbe functions may be called before this function.  If a
	client violates this rule, the effects of all subsequent Xdbe calls
	that it makes are undefined.

it is mandatory call this function.
---
 st.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
2012-09-16 10:45:36 +02:00
Christoph Lohmann
a62789788c Implementing italic-bold. This will require an increase of the avgWdth. 2012-09-14 19:46:07 +02:00
Christoph Lohmann
b156352656 Ignore NUL character as a padding character. Telnet may use this. Patch of
Roberto Vargas.
2012-09-13 23:21:40 +02:00
Christoph Lohmann
776a022e39 Importing the patch of Roberto Vargas to inherit signal handlers. 2012-09-13 23:19:57 +02:00
Christoph Lohmann
fe2ba95b3d Reset window title on terminal reset too. 2012-09-13 07:16:38 +02:00
Christoph Lohmann
d018c9c8ef Adding another bold off sequence. 2012-09-13 07:04:34 +02:00
Roberto E. Vargas Caballero
720cb816dc Remove buffering to fileio instead of calling fflush
By default text files are line buffered, and this means that -f option will
not write the line until a \n is printed. This is not very useful for
debugging, so a call to fflush was added. This patch substitute this call
(which will be done by each character painted) by the full remove of the
buffering in the file.
---
 st.c |   12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)
2012-09-12 21:51:55 +02:00
Roberto E. Vargas Caballero
b9d5fec4f2 Add xmalloc and xrealloc wrappers
If malloc  or realloc fail they return NULL. Theorically this condition
should be tested in the code, but it's a strange condition today (basically
if this is hapenning thenyou have a big problem), and even Linux never returns
NULL in the default configuration (only if the process don't have room in
the space address, something a bit impossible in the case of st). But stis
enough small for being executed in low resources computers where this can be
a real problem. So the easy way is creating a wrappers function for them and
call to die in case of error.
---
 st.c |   44 +++++++++++++++++++++++++++++++-------------
 1 file changed, 31 insertions(+), 13 deletions(-)
2012-09-12 21:25:35 +02:00
Christoph Lohmann
8f1144edee Make nyancat(1) work. Important release feature! 2012-09-12 13:20:10 +02:00
Christoph Lohmann
121d9109e8 Add preliminary blink stubs. Real implementation is still missing. 2012-09-12 13:08:26 +02:00
Christoph Lohmann
c092bce366 Add another obscure way to set a window title. 2012-09-12 13:00:39 +02:00
Christoph Lohmann
af29fb2a50 Fixing the too small window in non-tiling window managers. 2012-09-10 13:39:41 +02:00
Christoph Lohmann
122ed57702 Making the selection work again. 2012-09-06 08:02:56 +02:00
Christoph Lohmann
a1cd28f809 Allow simpler stdout -f handling. 2012-09-06 00:00:50 +02:00
Christoph Lohmann
f2da43a0b6 Adding instantenous debug output and fixing italic with a reset. 2012-09-05 23:38:57 +02:00
Christoph Lohmann
4a4ae19158 Removing masks for unhandled enter and leaving events. 2012-09-05 22:39:09 +02:00
Christoph Lohmann
dd0b7a077f If the selection is cleared, draw() and do it on button press too. 2012-09-05 22:17:42 +02:00
Roberto E. Vargas Caballero
f471a32d29 Unhighlight selection when selection is owner by other window
st marks the active selection using reverse colors in the box selection, but
once that another window becomes owner of the selection, it is very
confusing that st keeps highlight the old selection. Usually terminal
emulators remove the highlight when it is not valid anymore.

X sends a SelectionClear event in this situation, so we only have to add a
callback which unhighlight the selectin box.
---
 st.c |    9 +++++++++
 1 file changed, 9 insertions(+)
2012-09-05 21:55:45 +02:00
Christoph Lohmann
017af76f5c Forcing the parameter limit to xcopy() and selpaste(). Thanks to Rob Pilling. 2012-09-05 21:54:52 +02:00
Christoph Lohmann
42505c5215 Removing unneeded arguments to copy(). Thanks to Andrew Hills. 2012-09-05 21:52:01 +02:00
Christoph Lohmann
462a966ee2 Implement italic font support. 2012-09-05 21:48:26 +02:00
Christoph Lohmann
67c1a23053 Fixing the resizing behaviour. 2012-09-05 00:08:13 +02:00
Christoph Lohmann
e09709d92d Forgot one line. It's late. 2012-09-04 22:51:29 +02:00
Christoph Lohmann
b1d383a0a3 Cleaning up the fixed window size and the resizing of clients. 2012-09-04 22:44:33 +02:00
Christoph Lohmann
6e88c7f602 CUP == HVP; CHA == HPA; 2012-09-04 21:56:55 +02:00
Christoph Lohmann
59fe59d3d1 Unifying the old style. 2012-09-04 20:34:43 +02:00
Roberto E. Vargas Caballero
98b6f84bfc Check alternative screen before drawing box selection
Some programs use the alternative screen (vi, less, ...), whose
content is different of the main screen. If you select text in one of
the screen, you don't wait the box selection is painted in the other
screen, so it is necessary check if the selection was done in the same
screen we are going to paint. Before to this commit, you could do
something like:

	$ LESS="" ls | less
	(select some code)
	q

and selection box remains drawing in the main screen, but the content
of selection keeps text of the alternate screen.
---
 st.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
2012-09-04 20:33:01 +02:00
Roberto E. Vargas Caballero
66669a5585 Add newline to stderr message
---
 st.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
2012-09-04 20:31:21 +02:00
Christoph Lohmann
1d6702024b Fixing the border pixel when there is a negative position. 2012-09-03 23:09:34 +02:00
Christoph Lohmann
579f12d47b Add -g geometry to st and the manpage. 2012-09-03 23:02:29 +02:00
Roberto E. Vargas Caballero
930b2c4a7f Force redisplay of all lines in DECSCNM
When it is called DECSCNM all lines become dirty, because it is necessary
redraw all lines for getting the new colors. It is easy see the problem
running 'echo ^[[?5h'.

In order to get a correct flash when running tput flash is necessary wait
after DECSCNM, until the changes are displayed, because in other case the
switch between reverse on/reverse off will be too much fast and nothing will
happen.
---
 st.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
2012-09-03 21:52:34 +02:00
Roberto E. Vargas Caballero
a984ffc4cb Add write I/O to file
This is a theorical feature listed in http://st.suckless.org/goals. All the
input/output of the terminal will be written to a file, which can be very
useful for debugging, and also allow interconnect st to other process
through named pipes.
---
 st.1 |    6 ++++++
 st.c |   14 +++++++++++++-
 2 files changed, 19 insertions(+), 1 deletion(-)
2012-09-03 21:52:21 +02:00
Christoph Lohmann
b11d85c9be Add standout mode. 2012-09-02 19:53:50 +02:00
Christoph Lohmann
7f17a70834 Cleaning up lonely tabs. 2012-09-02 19:43:29 +02:00
Christoph Lohmann
588ba51a53 Make it more obvious where the wrong attribute is used. 2012-09-02 19:42:00 +02:00
Roberto E. Vargas Caballero
c79df9f78d Enable multiple arguments in SM and RM
SM and RM can receive multiple parameters, but the code only was accepting
only one. This patch join the code of set and reset modes (SM and RM) in a
common function and uses a loop which deals with all the arguments of the
sequence. This patch improves xterm and vt100 compability.
---
 st.c |  180 ++++++++++++++++++++++++++++--------------------------------------
 1 file changed, 76 insertions(+), 104 deletions(-)
2012-09-02 19:09:35 +02:00
Christoph Lohmann
81c678e53e Silencing the compiler but keeping strparse.
This will really be needed when there is a full 256 color support.
2012-08-30 21:19:53 +02:00
Christoph Lohmann
c58950f2ef Applying the CBT patch of Roberto Vargas. Thanks. 2012-08-30 21:17:54 +02:00
Christoph Lohmann
91fa81dbac Never trust terminfo fata morganas. And adding other xterm compatibility. 2012-08-30 07:38:47 +02:00
Christoph Lohmann
6696ef8563 Add OSC, DSC, PM, APC and settitle. 2012-08-29 23:14:20 +02:00
Roberto E. Vargas Caballero
aaef13aaaa Add CHT sequence
This sequence performs "Cursor Forward Tabulation <n> tab stops", which
although is not present in vt100 or vt102, xterm accepts it.
---
 st.c |    5 +++++
 1 file changed, 5 insertions(+)
2012-08-29 20:05:25 +02:00
Roberto E. Vargas Caballero
c084c06b40 Add TBC sequence
This sequence clears tab stops in the terminal. If the argument is not present
or is zero, then removes the tab stop of the current horizontal position. If
the argument is 3 then removes all the tab stops of the terminal. It was
necessary modify the terminfo entry tbc, because it has \E[2g instead of the
correct \E[3g.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
---
 st.c    |   12 ++++++++++++
 st.info |    2 +-
 2 files changed, 13 insertions(+), 1 deletion(-)
2012-08-29 19:59:47 +02:00
Roberto E. Vargas Caballero
93901ca4fe Add HTS sequence
This sequence adds a new tab stop in the current horizontal position. This
means that tputtab must be look for the next tab stop in the tabs array
instead of using a hard coded value offset. Also, CHT sequence XXX message
is removed because it is not a vt10x sequence (as far as I know it is a
vt50x sequence), and it is not implemented by linux virtual terminal neither
by xterm.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
---
 st.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
2012-08-29 19:59:43 +02:00
Roberto E. Vargas Caballero
ee7fd748ac Add tabs field into Term struct
Tabs stop are simulated in st using a fixed size of 8, always, without be
worried about sequences changing the tab stops. A user can put a tab stop in
each horizontal position of the screen, so we need at least one flag for
each column of the screen. In the same way as dirty flags is used for the
rows, it is used a bool dinamic array.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
---
 st.c |   22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)
2012-08-29 19:59:37 +02:00
Brandon Invergo
c6853fe185 apply post-XDBE patch BORDER fix 2012-08-03 14:46:40 +02:00